Roller Belt Natural/Brass

£89.00

Made from 5mm thick, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from solid brass. The rivets we use are also solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Natural/Copper

£89.00

Made from 5mm thick, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from copper plated, solid brass. The rivets we use are also copper plated solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Natural/Nickel

£89.00

Made from 5mm thick, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from antique nickel plated, solid brass. The rivets we use are also nickel plated solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Black/Brass

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from solid brass. The rivets we use are also solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Black/Copper

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from copper plated, solid brass. The rivets we use are also copper plated, solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Black/Nickel

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from antique nickel plated, solid brass. The rivets we use are also nickel plated, solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Harness Tan/Brass

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from solid brass. The rivets we use are also solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Harness Tan/Copper

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from copper plated, solid brass. The rivets we use are also copper plated, solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Harness Tan/Nickel

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from antique nickel plated, solid brass. The rivets we use are also nickel plated, solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Deep Honey/Brass

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from solid brass. The rivets we use are also solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Deep Honey/Copper

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from copper plated, solid brass. The rivets we use are also copper plated, solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Roller Belt Deep Honey/Nickel

£89.00

Made from 5mm thick, dip dyed, finest vegetable tanned English Harness Leather. Produced by one of England’s last tanneries who still use traditional pit tanning methods that date back centuries.  Each piece of leather takes a minimum of 3 months to produce, but then good things always take time!

Quality hardware is hard to come by, and the guys that make ours have been casting brass since 1837, so they’re pretty good at it. They also hold the Royal warrant as suppliers to household of the Queen of England, and that’s testament enough for us! Our roller buckle is cast by hand, using traditional sand casting skills, and is made from antique nickel plated, solid brass. The rivets we use are also nickel plated, solid brass, designed for quality and strength.

The result of our endeavours is a rugged belt of outstanding quality that will last a lifetime. Handmade with the care and attention that mass production will never imitate.

How we make it…

Each belt strip is cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped and holes punched. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the Leather:

Constructed from full grain 5mm thick finest English Harness leather. Vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of pure neatsfoot oil, used to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Tärnsjö Organic/Copper

£110.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

For this version, we chose natural vegetable tanned leather from Sweden’s reputed Tärnsjö tannery.

World famous for its quality and ethical manufacturing process, and also the only certified ‘organic’ tannery in the world! The leather has a ‘creamy’ texture, slightly darker in shade than our English natural veg tan, and is also full grain so it will show some shade texture and natural marking. Over time it will age naturally, changing colour from its natural state to varying darker shades of tan.

For hardware we wanted to offer something a little different to complement Tärnsjö’s stunning leather so we had our Garrison buckle cast in solid copper by England’s last remaining sand cast foundry. They’ve been casting brass since 1837, so they’re pretty good at it, and as a testament hold the Royal Warrant and supply goods to Her Majesty the Queen of England! They were kind enough to cast us a buckle made to our own unique design, from solid copper, which we felt complemented the leather perfectly. The copper is polished initially, but will change colour as it ages with exposure to air and contact, allowing each buckle to develop its own unique patina.

Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Established since 1873, Tärnsjö Garveri are amongst 5% of tanneries in the world using traditional vegetable tanning to produce their leather. The tannery is located in a forest on the banks of the Tärnsjön lake in Sweden and uses hides from local Swedish farms to produce superior quality leather.

Tärnsjö are committed to responsible, sustainable manufacture, and to minimising the environmental impact of the tanning process. Each hide can be traced back to the farm it was sourced from and each process it goes through is certified to be fully organic.

English hand cast, heavy, copper buckle fitted with solid brass, copper plated rivets and solid copper keeper.

Supplied with Barnes & Moore vintage effect gift box, made from recycled materials and complimentary 5ml bottle of natural English Neatsfoot Oil to condition the leather.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Black/Black

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, solid brass buckle with a military grade, black epoxy coating. Fitted with solid brass, black epoxy coated rivets and solid brass, black epoxy coated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Black/Brass

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, solid brass buckle with a natural polished finish. Fitted with solid brass rivets and solid brass keeper.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Black/Nickel

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Caramel/Black

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, solid brass buckle with a military grade, black epoxy coating. Fitted with solid brass, black epoxy coated rivets and solid brass, black epoxy coated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Caramel/Brass

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Caramel/Nickel

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished. 

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Garrison is 38mm (1.5”).

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Natural/Black

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, solid brass buckle with a military grade, black epoxy coating. Fitted with solid brass, black epoxy coated rivets and solid brass, black epoxy coated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Natural/Brass

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Natural/Nickel

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Oak/Black

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, solid brass buckle with a military grade, black epoxy coating. Fitted with solid brass, black epoxy coated rivets and solid brass, black epoxy coated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Oak/Brass

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Oak/Nickel

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Deep Honey/Black

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, solid brass buckle with a military grade, black epoxy coating. Fitted with solid brass, black epoxy coated rivets and solid brass, black epoxy coated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Deep Honey/Brass

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Deep Honey/Nickel

£89.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

We chose English vegetable tanned bridle ‘butt’ leather for the strap that is stained and finished by hand, and renowned for its quality and durability. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each leather belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass keeper in antique nickel finish.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence).

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Dark Stain/Black

£99.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

For this version, we chose 12 month oak bark tanned bridle leather, from Bakers Tannery in Devon, England. Made in limited quantities, this leather is renowned worldwide for it’s quality and durability.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it 

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from a very special leather, supplied by England’s last remaining traditional Oak Bark Tannery.  9-10oz finest English full grain oak bark leather. This leather undergoes a labour intensive, traditional 12 month tanning process to produce a truly outstanding leather. This results in a very strong, yet lightweight leather.

Oak Bark leather is finished by hand with a unique blend of oils and greases that allow the true natural characteristics and colour of the leather to be highlighted. As a result, this leather will show some variation in colour, which is naturally occurring and adds to the unique beauty of each belt.

The surface also has a ‘full grain’ finish and, as a result some natural creasing and marking of the hide may be visible on the surface of your belt, which is a natural characteristic of the leather.

The journey starts with English oak bark, ground down by a water wheel, which is fed by a local river at the tannery. This is then soaked in water to draw out the natural tannin which forms the base of the tanning liquor.

Hides are then soaked in pits for 2-3 weeks to aid removal of the hair, this part of the process ensures the leather retains its fibre strength, and has been done this way for centuries. They are then cleaned by hand and washed before being suspended on wooden ‘sticks’ and suspended in the tanning pits, in the oak bark liquor for 9 months.

The hides are then layered in the pits with oak bark chippings inbetween them for a further 3 months and then shaved to a level thickness. Fish oil is applied and the hides are dipped in greases, and then ‘set’ by hand. The setting process is highly skilled and involves using traditional tools to push the leather grain out to achieve a flat, workable surface.

The final stage is staining the leather to the required colour by hand, and then conditioning with dubbin wax to produce a stunning quality leather.

English hand cast, heavy, solid brass buckle with a military grade, black epoxy coating. Fitted with solid brass, black epoxy coated rivets and solid brass, black epoxy coated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials, and complimentary 5ml bottle of natural neatsfoot oil.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Dark Stain/Brass

£99.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

For this version, we chose 12 month oak bark tanned bridle leather, from Bakers Tannery in Devon, England. Made in limited quantities, this leather is renowned worldwide for it’s quality and durability.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it 

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Constructed from a very special English Leather, supplied by England’s last remaining traditional Oak Bark Tannery.  9-10oz finest English full grain oak bark leather. This leather undergoes a labour intensive, traditional 12 month tanning process to produce a truly outstanding leather. This results in a very strong, yet lightweight leather.

Oak Bark leather is finished by hand with a unique blend of oils and greases that allow the true natural characteristics and colour of the leather to be highlighted. As a result, this leather will show some variation in colour, which is naturally occurring and adds to the unique beauty of each belt.

The surface also has a ‘full grain’ finish and, as a result some natural creasing and marking of the hide may be visible on the surface of your belt, which is a natural characteristic of the leather.

The journey starts with English oak bark, ground down by a water wheel, which is fed by a local river at the tannery. This is then soaked in water to draw out the natural tannin which forms the base of the tanning liquor.

Hides are then soaked in pits for 2-3 weeks to aid removal of the hair, this part of the process ensures the leather retains its fibre strength, and has been done this way for centuries. They are then cleaned by hand and washed before being suspended on wooden ‘sticks’ and suspended in the tanning pits, in the oak bark liquor for 9 months.

The hides are then layered in the pits with oak bark chippings inbetween them for a further 3 months and then shaved to a level thickness. Fish oil is applied and the hides are dipped in greases, and then ‘set’ by hand. The setting process is highly skilled and involves using traditional tools to push the leather grain out to achieve a flat, workable surface.

The final stage is staining the leather to the required colour by hand, and then conditioning with dubbin wax to produce a stunning quality leather.

English hand cast, heavy, solid brass buckle with a natural polished finish. Fitted with solid brass rivets and solid brass keeper.

Supplied with Barnes & Moore gift box, made from recycled materials, and complimentary 5ml bottle of natural neatsfoot oil.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Garrison Belt Dark Stain/Nickel

£99.00

Our Garrison belt was born out of a desire to make a high quality belt, that would look good, stand the test of time, and essentially hold our jeans up!

We settled on a simple, functional design, with a focus on the quality of materials and workmanship, and set about creating a belt that we would be proud to put our name to.

For this version, we chose 12 month oak bark tanned bridle leather, from Bakers Tannery in Devon, England. Made in limited quantities, this leather is renowned worldwide for it’s quality and durability.

Hardware was equally important so we went to the England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at it. Using traditional skills they cast us a buckle made to our own unique design, from solid brass. Each of our Garrison buckles weighs in at a hefty 100g and is built to last a lifetime.

The result of our endeavours is a belt of outstanding quality, handmade with the care and attention that mass production will never imitate.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather 

Constructed from a very special English Leather, supplied by England’s last remaining traditional Oak Bark Tannery.  9-10oz finest English full grain oak bark leather. This leather undergoes a labour intensive, traditional 12 month tanning process to produce a truly outstanding leather. This results in a very strong, yet lightweight leather.

Oak Bark leather is finished by hand with a unique blend of oils and greases that allow the true natural characteristics and colour of the leather to be highlighted. As a result, this leather will show some variation in colour, which is naturally occurring and adds to the unique beauty of each belt.

The surface also has a ‘full grain’ finish and, as a result some natural creasing and marking of the hide may be visible on the surface of your belt, which is a natural characteristic of the leather.

The journey starts with English oak bark, ground down by a water wheel, which is fed by a local river at the tannery. This is then soaked in water to draw out the natural tannin which forms the base of the tanning liquor.

Hides are then soaked in pits for 2-3 weeks to aid removal of the hair, this part of the process ensures the leather retains its fibre strength, and has been done this way for centuries. They are then cleaned by hand and washed before being suspended on wooden ‘sticks’ and suspended in the tanning pits, in the oak bark liquor for 9 months.

The hides are then layered in the pits with oak bark chippings inbetween them for a further 3 months and then shaved to a level thickness. Fish oil is applied and the hides are dipped in greases, and then ‘set’ by hand. The setting process is highly skilled and involves using traditional tools to push the leather grain out to achieve a flat, workable surface.

The final stage is staining the leather to the required colour by hand, and then conditioning with dubbin wax to produce a stunning quality leather.

English hand cast, heavy, brass buckle with an antique nickel plated finish. Fitted with solid brass nickel plated rivets and solid brass, nickel plated keeper.

Supplied with Barnes & Moore gift box, made from recycled materials, and complimentary 5ml bottle of natural neatsfoot oil.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Black/Brass

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass, matt finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain saddle hide. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, triple bar solid brass buckle with an antique matt brass finish. Fitted with solid brass rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Black/Nickel

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass antique nickel finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain saddle hide. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, heavy quality solid brass buckle with an antique nickel finish. Fitted with solid brass, nickel plated rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Chestnut/Brass

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass, matt finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain saddle hide. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, triple bar solid brass buckle with an antique matt brass finish. Fitted with solid brass rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Chestnut/Nickel

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass antique nickel finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain saddle hide. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, heavy quality solid brass buckle with an antique nickel finish. Fitted with solid brass, nickel plated rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Mahogany/Brass

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass, matt finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain saddle hide. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, triple bar solid brass buckle with an antique matt brass finish. Fitted with solid brass rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Mahogany/Nickel

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass antique nickel finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain saddle hide. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, heavy quality solid brass buckle with an antique nickel finish. Fitted with solid brass, nickel plated rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Natural/Brass

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass antique finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain natural saddle hide. Over time natural leather will darken and develop a fine, unique patina with exposure to natural light. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, heavy quality solid antique matt brass buckle. Fitted with solid brass rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Bosun Belt Natural/Nickel

£89.00

Functional and built to stand the test of time, our Bosun belt is inspired by seafaring types from a bygone age.

Made from highest quality English Saddle Butt, and fitted with a sturdy solid brass antique nickel finish triple bar buckle, which has been hand cast to our requirements by skilled craftsmen using traditional time served methods.

We chose English vegetable tanned saddle ‘butt’ leather for the strap that is stained and finished by hand. This leather has a more matt finish than the glossy bridle leather finish we offer on our Garrison belt. The ‘butt’ is known to to be the strongest, part of the hide due to fibre strength and reserved for only the finest leather strap products.

Our buckle is supplied by England’s last remaining sand cast foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. They’ve been casting brass since 1837, so they’re pretty good at what they do.

How we make it

Each belt strip is hand cut to our standard width of 38mm (1.5’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally, the teardrop shaped belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English full grain natural saddle hide. Over time natural leather will darken and develop a fine, unique patina with exposure to natural light. This leather is traditionally vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Width of the Bosun is 38mm (1.5”).

English hand cast, heavy quality solid brass buckle with an antique matt nickel finish. Fitted with solid brass, nickel plated rivets.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml pot of our handmade natural beeswax polish (contains natural beeswax, mineral oil and natural vanilla essence). 

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Black/Black

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a military grade black epoxy coating. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with black epoxy coated, solid brass rivets and solid brass, black epoxy coated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Black/Brass

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a natural polished finish. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with solid brass rivets and solid brass keeper.

Shipping info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Black/Nickel

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Slim is 32mm (1 1/4”).

English solid brass, antique nickel plated buckle. Hand crafted using traditional methods and made exclusively for Barnes and Moore. Fitted with nickel plated solid brass rivets and solid brass, antique nickel plated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Deep Honey/Black

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a military grade black epoxy coating. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with black epoxy coated, solid brass rivets and solid brass, black epoxy coated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Deep Honey/Brass

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a natural polished finish. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with solid brass rivets and solid brass keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Deep Honey/Nickel

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English Bridle leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. This method achieves a supple, natural finish that will develop a beautiful patina over time. Standard width of the Slim is 32mm (1 1/4”).

English solid brass, antique nickel plated buckle. Hand crafted using traditional methods and made exclusively for Barnes and Moore. Fitted with nickel plated solid brass rivets and solid brass, antique nickel plated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Natural/Black

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English natural tooling leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. Over time this leather will darken and develop a fine, unique patina with exposure to natural light. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a military grade black epoxy coating. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with black epoxy coated, solid brass rivets and solid brass, black epoxy coated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Natural/Brass

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English natural tooling leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. Over time this leather will darken and develop a fine, unique patina with exposure to natural light. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a natural polished finish. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with solid brass rivets and solid brass keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Natural/Nickel

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English natural tooling leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. Over time this leather will darken and develop a fine, unique patina with exposure to natural light. Standard width of the Slim is 32mm (1 1/4”).

English solid brass, antique nickel plated buckle. Hand crafted using traditional methods and made exclusively for Barnes and Moore. Fitted with nickel plated solid brass rivets and solid brass, antique nickel plated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Oak/Black

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English natural tooling leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a military grade black epoxy coating. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with black epoxy coated, solid brass rivets and solid brass, black epoxy coated keeper.

Shipping Info

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Oak/Brass

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English natural tooling leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. Standard width of the Slim is 32mm (1 1/4”).

English solid brass buckle with a natural polished finish. Hand cast using traditional methods and made exclusively for Barnes and Moore. Fitted with solid brass rivets and solid brass keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Slim Belt Oak/Nickel

£69.00

The Slim Belt

We created the slim belt in response to our customers who prefer a narrow profile belt. It’s designed to complement a wide range of trousers and chino’s, and is simply a scaled down version of our popular Garrison belt.

The slim belt features a hand cast buckle, made exclusively for us by a traditional local foundry who also hold the Royal Warrant and supply goods to Her Majesty the Queen of England. We use finest English vegetable tanned bridle leather of the highest quality for the strap, and each belt is made by hand at our workshop in England.

How we make it

Each belt strip is hand cut to our standard width of 32mm (1 1/4’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand. Finally the belt holes are punched and the leather is hand polished.

About the leather

Constructed from 9-10oz finest English natural tooling leather. Full grain, vegetable tanned using a time consuming, environmentally friendly process which utilises natural materials, including tree bark. Standard width of the Slim is 32mm (1 1/4”).

English solid brass, antique nickel plated buckle. Hand crafted using traditional methods and made exclusively for Barnes and Moore. Fitted with nickel plated solid brass rivets and solid brass, antique nickel plated keeper.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.

If you you are unsure of your jean/trouser size and would like a custom size, please click here.

Clobbercalm Supply Co – Railroad Belt

£130.00

Barnes and Moore X Clobbercalm Supply Co. Railroad Belt

We’ve got together with our friends at Clobbercalm Supply Co to create a somewhat substantial belt with a design inspired by vintage workwear belts from the mid 1800’s, when things were made to last, out of necessity rather than design.

This is a real heavyweight of a belt, with the 2’’ strap made from 12-13 oz finest organic natural vegetable tanned leather from Sweden’s reputed Tarnsjo tannery. This tannery has a rich heritage, dating back to 1873, and are the the only certified ‘organic’ tannery in the world. They are renowned for the high quality of their leather and ethical manufacturing process. The leather has a ‘creamy’ texture, slightly darker in shade than our English natural veg tan, and is also full grain. Each belt is unique, so it will show some shade texture and natural markings which add to the natural beauty of the leather.  Over time, with exposure to natural light it will age naturally, changing colour from its natural state to varying darker shades of tan, and develop a truly stunning patina.

The double prong buckle is cast by hand in solid brass by England’s last remaining sand cast foundry. They’ve been casting brass goods since 1837, so they’re pretty good at it, and as a testament hold the Royal Warrant and supply goods to Her Majesty the Queen of England!

How we make it

Each belt strip is hand cut to our standard width of 50mm (2’’), trimmed to size and the tips hand shaped. The edges are bevelled and hand ‘burnished’, which seals the fibres of the leather, not only for aesthetics, but to help prevent the edges absorbing moisture. The strap is then cut to receive the buckle, which is riveted by hand.

About the leather

Established since 1873, Tarnsjo Garveri are amongst 5% of tanneries in the world using traditional vegetable tanning to produce their leather. The tannery is located in a forest on the banks of the Tärnsjön lake in Sweden and uses hides from local Swedish farms to produce superior quality leather.

Tarnsjo are committed to responsible, sustainable manufacture, and to minimising the environmental impact of the tanning process. Each hide can be traced back to the farm it was sourced from and each process it goes through is certified to be fully organic.

English solid brass buckle. Hand crafted using traditional methods and made exclusively for Barnes and Moore. The rivets are solid brass and set by hand.

Supplied with Barnes & Moore gift box, made from recycled materials and complimentary 5ml bottle of natural English Neatsfoot Oil to condition the leather.

Shipping Info:

Your Barnes & Moore belt is made by hand, however we will endeavour to ship your belt within 2 working days. We’re proud to offer free shipping to the UK and most major European destinations. Shipping to the rest of the world is £10.00 flat rate. Please use our shipping calculator to see if your destination qualifies for free shipping.

Sizing Info

Our belts are sized to suit the majority of standard jean/trouser waist sizes and have six holes for adjustment Please order your normal jean/trouser waist size (28’’-42’’).

If your waist size falls in between our standard sizes, simply order the next size up i.e. for a 33” waist, please order a 34” belt.